This article explains how to report vehicle damage during an inspection using the RunBuggy Mobile App.
Overview
After completing the required inspection photos, you'll be prompted to report any vehicle damage. The app allows you to enter damage codes manually or select damage details from dropdown menus. You can also attach multiple photos to each damage report.
Report Damage During an Inspection
- Complete the required inspection photos.
When prompted, tap Report Damage.
Select or Enter a Damage Code
You can identify damage in either of the following ways:
- Manually enter the damage code.
- Use the dropdown menus to select:
- Damage Area
- Damage Type
- Damage Severity
Select Damage Area Code
- Open the Damage Area dropdown.
- Use the search bar to quickly locate the appropriate code.
- Select the correct damage area.
Select Damage Type Code
- Open the Damage Type dropdown.
- Use the search bar to quickly locate the appropriate code.
- Select the correct damage type.
Select Damage Severity Code
- Open the Damage Severity dropdown.
- Use the search bar to quickly locate the appropriate code.
- Select the correct damage severity.
Reset a Damage Entry
If you need to start over, tap Reset to clear the current damage code and selections.
Add Damage Photos
- Tap Report Damage.
- Photograph the damage.
- Take as many photos as needed to document the damage.
Tap the checkmark when you've finished taking photos.
Report Additional Damage
- From the damage report screen, tap Add New Damage.
- Enter the details for the additional damage.
Capture photos as needed.
Manage Existing Damage Reports
To review a reported damage item:
- Tap the expand arrow next to the damage entry.
- From the expanded view, you can:
- Delete the damage entry.
- Take additional photos.
Review previously captured photos.
Manage Photos
When reviewing damage photos, you can:
- Delete an unwanted photo.
Retake a photo if necessary.
Return to the Inspection Report
- Tap Go to Inspection Report.
- Review the damages you've reported.
Add more damage reports if needed.
Add Damage from the Inspection Report
- Tap the plus (+) icon.
- Select the option to add a new damage report.
Or add additional photos to an existing damage report.
If You Selected "No Damage" by Mistake
- Tap the plus (+) icon under Additional Photos.
- Add a new damage report.
Continue documenting the damage as needed.
Complete the Inspection
- Tap Complete Inspection.
- The inspection and damage report will be submitted.
Verify that all observed damages have been reported before completing the inspection.
Best Practices
- Report all vehicle damage during the inspection process.
- Capture multiple photos when needed to clearly document damage.
- Review damage entries before submitting the inspection.
- Confirm that all damage reports include the correct area, type, and severity codes.
The video below shows you how to report damages during a vehicle inspection using the RunBuggy Mobile App.